Welcome to AVID

$0.00
You have no items in your shopping cart.

0

Snatch Block

Items 1 to 10 of 21 total

Page:
  1. 1
  2. 2
  3. 3

Grid  List 

  1. Default Image

    Smittybilt 17,600 lb. Snatch Block

    The multi-purpose snatch block will double the pulling power of any winch and can change your pulling direction without damaging the wire rope. Us of the snatch block will also help in reducing heat build up and amperage draw.
    $24.99
  2. Default Image

    Mile Marker Industrial Snatch Block

    Enables you to retrieve loads that are double a winch’s capacity by reducing the load on the winch by half. It also facilitates winching from varying angles when straight ahead isn’t the best option. 30,000 Pound capacity.
    $116.99
  3. Default Image

    Superwinch 10,000 lbs. Pulley Block

    Designed for winches with a rated line pull up to 5,000 lbs. including the X3, Terra 45 and S5000. The Superwinch pulley block is specifically designed for maximizing the pulling power of a winch. This 10,000 lb pulley block allows the winch to effectively use the power of the “double line pull”. The hook on the pulley block is removed and the winch cable line is run over the pulley. The pulley block hook is then replaced and then attached to a strap wrapped on the forward fixed-object. The hook on the winch cable end is attached to the front of the vehicle being pulled-or to a fixed object close to the front of the vehicle. Warning: Do not use for hoisting.
    $29.99
  4. Default Image

    Superwinch 8,000 lbs. Pulley Block

    Designed for winches with a rated line pull up to 4,000 lbs. including the EX1, X1, X2, LT2000, UT3000, LT3000ATV, S3000, S4000, Terra 25 and Terra 35. The Superwinch pulley block is specifically designed for maximizing the pulling power of a winch. This 8,000 lb pulley block allows the winch to effectively use the power of the “double line pull”. The hook on the pulley block is removed and the winch cable line is run over the pulley. The pulley block hook is then replaced and then attached to a strap wrapped on the forward fixed-object. The hook on the winch cable end is attached to the front of the vehicle being pulled-or to a fixed object close to the front of the vehicle. Warning: Do not use for hoisting.
    $21.99
  5. Default Image

    Rugged Ridge Snatch Block Pulley

    The Rugged Ridge Snatch Block Pulley is a must have for an ATV/UTV owner! It is suitable for use up to 8,000lbs and with winch cables up to 1/4” in diameter. The pulley can be used to double the capacity for your winch, or to reduce the strain on the winch motor and your electrical system. For recovery operations were a straight pull is not viable option, the pulley helps change the angle of your pull. (Not recommended for full size vehicles.)
    $23.99
  6. Default Image
  7. Default Image

    Mile Marker Heavy-duty Snatch Block

    Heavy-duty Snatch Block is rated at 24,000 pounds and utilizes a grease fitting to provide less friction on pulley rotation.
    $120.99
  8. Default Image
  9. Default Image

    Warn Snatch Block

    $1,592.99
  10. Default Image

    Superwinch Swing Away Pulley Block

    Smooth surfaces and tight joint tolerances make it perfect for synthetic rope up to 3/8" Diameter
    $66.99

Items 1 to 10 of 21 total

Page:
  1. 1
  2. 2
  3. 3

Grid  List